Arriving Members - This way please... - Printable Version +- Rogue-Nation Discussion Board (https://rogue-nation.com/mybb) +-- Forum: Rogue-Nation Forums (https://rogue-nation.com/mybb/forumdisplay.php?fid=1) +--- Forum: Guest Area (https://rogue-nation.com/mybb/forumdisplay.php?fid=11) +--- Thread: Arriving Members - This way please... (/showthread.php?tid=71) |
Arriving Members - This way please... - Sol - 11-18-2022 Welcome, Welcome !!! If you need to have a temporary password given to you ( which you can change once you're in ), just leave us a message here on this thread and we'll oblige. Or you can register again through the register button on top. Whichever is easiest for you! As an arriving member who's never been here before, you might want to look up the Tutorials to know what is where... There are a few tips in this board here: Rogue-Nation Discussion Board - Rogue-Nation Tutorials (43) The Boards are replicated as they were on the previous site, so navigating the Recent Threads is the same as what you were used to. Your UserCP is on the top right via the dropdown menu where your username is. There you have access to change your avatar (new dimensions for the avatars are 150px X 150px), your signature, your Private Messages, your Alerts... The Shoutbox is ready to roll and fully functional, on the home page. So, enjoy, have fun and... Welcome Home !!! Sol - for Admins & Staff. P.S. Questions? Just fire away !!! RE: Arriving Members - This way please... - BIAD - 11-18-2022 And for all those new folk and those who joined us on the older site who didn't acquire an avatar... there's always The Little Shoppe of Avatars, where suggestions can be given and artwork created to suit. On a side-note, Boy In A Dress no longer requires the measurement of a customer's inside-leg. The Moderators and Administrators sternly warned him about that. RE: Arriving Members - This way please... - Guest - 11-19-2022 (11-18-2022, 09:44 PM)Sol Wrote: Welcome, Welcome !!! RE: Arriving Members - This way please... - Sol - 11-19-2022 [quote pid="702" dateline="1668861426"] (11-18-2022, 09:44 PM)Sol Wrote: Welcome, Welcome !!! [/quote] For that, I need your username. You can always send me a PM on RN3 as well, the PM system is still active there for exactly doing that... Sol. RE: Arriving Members - This way please... - BIAD - 11-19-2022 On the 'old' site, 727Sky says a few hours ago: "I have tried several times to log into the new site. Can not enter email address at the prompt and my old pass word does not work..... password recovery does not work." RE: Arriving Members - This way please... - Gordi - 11-19-2022 (11-19-2022, 02:40 PM)BIAD Wrote: On the 'old' site, 727Sky says a few hours ago: I'll change his password and send him an email. G PS - I have now changed his password and sent him an email to confirm. G RE: Arriving Members - This way please... - Sol - 11-19-2022 I had already sent him a temporary password through PM on RN3. Still can't get in? hmmmm.... I hope Gordi's help works.. . RE: Arriving Members - This way please... - SimeonJ - 11-20-2022 How I can block someone? I wish to not see his replies, shoutboxes, etc. I didn't found this option in the forum, while it exist in the *3.com version for sure. RE: Arriving Members - This way please... - Sol - 11-20-2022 (11-20-2022, 02:36 AM)SimeonJ Wrote: How I can block someone? I wish to not see his replies, shoutboxes, etc. I didn't found this option in the forum, while it exist in the *3.com version for sure. You cannot block someone. But you can ignore them. UserCP Miscellaneous Buddy/Ignore List. Ignoring them keeps their posts away from view, to you, as well as their PMs. . RE: Arriving Members - This way please... - stosh64 - 11-20-2022 I need a password please. stosh64 Thank you! RE: Arriving Members - This way please... - BIAD - 11-20-2022 Welcome Baddmove, enjoy!! RE: Arriving Members - This way please... - Gordi - 11-20-2022 (11-20-2022, 02:08 PM)stosh64 Wrote: I need a password please. I have sent you an email stosh! (To your old RN3 registered email address) cheers Gordi RE: Arriving Members - This way please... - baddmove - 11-20-2022 (11-20-2022, 03:06 PM)BIAD Wrote: Welcome Baddmove, enjoy!! Thanks! RE: Arriving Members - This way please... - Guest - 11-20-2022 I left a message at contact us, as I don't fancy leaving my email in the public spaces. PMd Gordi at ATS for some guidance. I don't want to lose my username, and have no clue how to keep it the same. It already said I cannot use my username DontTreadOnMe RE: Arriving Members - This way please... - Gordi - 11-20-2022 [quote pid="774" dateline="1668964214"] I left a message at contact us, as I don't fancy leaving my email in the public spaces. PMd Gordi at ATS for some guidance. I don't want to lose my username, and have no clue how to keep it the same. It already said I cannot use my username DontTreadOnMe [/quote] It should be sorted now D I've pm'd you at ATS too. Gx RE: Arriving Members - This way please... - Guest - 11-20-2022 [quote pid="774" dateline="1668964214"] I left a message at contact us, as I don't fancy leaving my email in the public spaces. PMd Gordi at ATS for some guidance. I don't want to lose my username, and have no clue how to keep it the same. It already said I cannot use my username DontTreadOnMe [/quote] Thanks. Gordi contacted me at ATS. Should be up and running shortly. RE: Arriving Members - This way please... - Gordi - 11-20-2022 [quote pid="776" dateline="1668964688"] Thanks. Gordi contacted me at ATS. Should be up and running shortly. [/quote] Cool! G RE: Arriving Members - This way please... - DontTreadOnMe - 11-20-2022 (11-20-2022, 05:22 PM)Gordi Wrote: [quote pid="776" dateline="1668964688"] Cool! G [/quote] Thanks, Gordi...I'm back. Can I somehow transfer my old RN-3 avatar? RE: Arriving Members - This way please... - BIAD - 11-20-2022 (11-20-2022, 05:24 PM)DontTreadOnMe Wrote:(11-20-2022, 05:22 PM)Gordi Wrote: [quote pid="776" dateline="1668964688"] Thanks, Gordi...I'm back. Can I somehow transfer my old RN-3 avatar? [/quote] I've just done that, but I think I can spruce it size-wise. RE: Arriving Members - This way please... - DontTreadOnMe - 11-20-2022 (11-20-2022, 05:26 PM)BIAD Wrote:(11-20-2022, 05:24 PM)DontTreadOnMe Wrote:(11-20-2022, 05:22 PM)Gordi Wrote: [quote pid="776" dateline="1668964688"] I've just done that, but I think I can spruce it size-wise. [/quote] Looks great to me!! Thanks. BTW...thanks to all the RN staff! All the work that has to be done making this changeover....much appreciated. |